Engine Rebuild

I got a EJ22 with 137K miles on it to use for the new Vanagon project. The plan was to use it for a while, and then do a rebuild sometime down the road. When I removed the oil pan to take a look though, I saw quite a few metal flakes, so I decided to get it rebuilt.

After looking around I decided check with Colorado Component Rebuilders Inc. (http://www.ccrengines.com/). They seemed pretty knowledgeable on the phone, so we worked out the details, and today FedEx Freight picked up the engine.

Here it is wrapped up and bolted to the pallet.

Off it goes...

Throttle Body

There was quite a bit of corrosion on the throttole body, so I decided to paint it with the silver POR 15. After degreasing it as much as I could I removed most of the moving parts. Before I removed them though I took some pictures of various adjustments so that I could get them back pretty close when I put it back together. I also took some overview pictures to help me get things back together later.

Throttle position sensor adjustment before removing.

More set screw adjustments:

 

Overview of linkages:

After most moving parts were removed (I left the butterfly in), some areas were taped off. I just used a cheap disposable brush.

Putting everything back together wasn't has hard as I thought it would be. I grouped parts in zip-loc bags to help me remember what went together.