 |
| I removed the rear door. I had to open up the AC covers to access wiring to the door. |
 |
| Here's the new engine waiting to go in. |
 |
| Before... |
 |
| Starting to disconnect and remove things. |
 |
| The beginning of the parts pile. |
 |
| I decided to jack it up at the cross member ahead of the rear wheels. |
 |
| Weight is on the cherry picker now. |
 |
| I put a furniture dolly under the engine/trans-axle. |
 |
| The floor jack supports the trans-axle while the mount is removed. |
 |
| I couldn't get the engine all the way onto the dolly because the cherry picker was in the way. |
 |
| I put cross member on jack stands to get the cherry picker out of there. |
 |
| Once the cherry picker was gone, I could lower the engine one side at a time with the floor jack. |
 |
| With everything out of the way, it rolled right out on the dolly. |
 |
| You can see here how high I had to get the jack stands to clear the engine sitting on the dolly. It probably would have been safer to jack the front some too. |
 | ||
| It's out! |