Throttle Body

There was quite a bit of corrosion on the throttole body, so I decided to paint it with the silver POR 15. After degreasing it as much as I could I removed most of the moving parts. Before I removed them though I took some pictures of various adjustments so that I could get them back pretty close when I put it back together. I also took some overview pictures to help me get things back together later.

Throttle position sensor adjustment before removing.

More set screw adjustments:

 

Overview of linkages:

After most moving parts were removed (I left the butterfly in), some areas were taped off. I just used a cheap disposable brush.

Putting everything back together wasn't has hard as I thought it would be. I grouped parts in zip-loc bags to help me remember what went together.